Swimming pools There are many types of chemical regulators available for use. Different chemical substances Considering that it is produced to be used in variable situations, regulating pool water is a very difficult and knowledge-demanding task. This is why Quardex owner of the brand AEC Chemistry It will always be healthier for users to receive technical support from experienced manufacturers or dealers in their field.
However, the worst chemical combinations that users should never apply can be listed as follows:
High pH + High Calcium: With this prescription in pool water high amounts of cloudiness can be observed, while thick layers can form on water surfaces and pipes. Even if care is not taken calcium It is also possible to see sharp crystallized nodules.
High pH + Low Chlorine: Clouding and mossification is the ideal combination of water. Mosses,high pHlevel of shelter, low chlorine will provide an optimal environment for them to reproduce.
Low pH + Low Alkalinity: It can cause a high amount of abrasion on surfaces such as copper, metal, steel, plaster. Low pHmosses prevention and chlorine is ideal for efficiency, but when it is below 7.0 acidic waterpoolsurfaces and pool equipment it can start to cause harm.
Low pH + High Alkalinity: In the same situation as above, however pH value rise, alkalinity will be challenging because of its high cost.
Low Chlorine + Low Stabilizer: It is the ideal combination for hazy, cloudy and green pool water. Your poolif you provide regular care every day, chlorine you can tell at a glance when its level is low. In this case, you can act fast and shock your pool chlorine level you can upgrade and resolve the situation.
High Chlorine + High Stabilizer: This duo is a high chlorine levels (5-10 ppm) can damage soft and shiny surfaces.
High Stabilizer level: Stabilizer level above 100 ppm chlorine it damages its function in the pool and it becomes impossible to draw conclusions from chlorine tests.
High Amount of Chlorine Constituents:Chloramine known as the compound, free in water chlorine with molecules ammonium or nitrogen is formed by its combination. This component, which does not act as an active cleaner, causes red eyes in those who come into contact with the pool water and causes odor in the pool.
Chloramine It is recommended to shock the pool when the level exceeds 0.3 ppm.
High Phosphate level:Phosphates can enter the pool from many sources, but when the phosphate level test exceeds the 300 ppb (particles per million) limit, it can be treated with phosphate-reducing chemicals. pool water it is possible to balance. Phosphates in the pool as it is food for algae. phosphate level remains stable is an important indicator.
AEC Chemistry for the maintenance of the pool water as Quardex We underline that we are always at your service with our brand product group. You can reach us by phone at 0262 754 57 23 or [email protected]You can send an e-mail at.
